zmodload [ -dL ] [ ... ]
zmodload -F [ -lLme -P param ] module [+-]feature...
zmodload -e [ -A ] [ ... ]
zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
zmodload -A [ -L ] [ modalias[=module] ... ]
zmodload -R modalias ...
       Performs operations relating to zsh's loadable modules.  Loading
       of  modules  while the shell is running (`dynamical loading') is
       not available on all operating systems, or on all  installations
       on  a particular operating system, although the zmodload command
       itself is always available and can be used to manipulate modules
       built  into  versions  of the shell executable without dynamical
       loading.

       Without arguments the names of all currently loaded binary  mod-
       ules  are  printed.  The -L option causes this list to be in the
       form of a series of zmodload  commands.   Forms  with  arguments
       are:

       zmodload [ -i ] name ...
       zmodload -u [ -i ] name ...
              In  the  simplest  case,  zmodload loads a binary module.
              The module must be in a file with a  name  consisting  of
              the specified name followed by a standard suffix, usually
              `.so' (`.sl' on HPUX).  If the module  to  be  loaded  is
              already loaded the duplicate module is ignored.  If zmod-
              load detects an inconsistency, such as an invalid  module
              name  or circular dependency list, the current code block
              is aborted.   Hence `zmodload module 2>/dev/null' is suf-
              ficient  to test whether a module is available.  If it is
              available, the module is loaded if necessary, while if it
              is  not  available, non-zero status is silently returned.
              The option -i is accepted for compatibility  but  has  no
              effect.

              The  named  module is searched for in the same way a com-
              mand is, using $module path instead of  $path.   However,
                                    -
              the  path  search  is performed even when the module name
              contains a `/', which it usually does.  There is  no  way
              to prevent the path search.

              If  the  module  supports  features (see below), zmodload
              tries to enable all features when loading a  module.   If
              the  module  was successfully loaded but not all features
              could be enabled, zmodload returns status 2.

              With -u, zmodload unloads modules.  The same name must be
              given  that  was given when the module was loaded, but it
              is not necessary for the module to exist in the file sys-
              tem.  The -i option suppresses the error if the module is
              already unloaded (or was never loaded).

              Each module has a boot and a cleanup function.  The  mod-
              ule will not be loaded if its boot function fails.  Simi-
              larly a module can only be unloaded if its cleanup  func-
              tion runs successfully.

       zmodload -F [ -almLe -P param ] module [+-]feature...
              zmodload  -F  allows more selective control over the fea-
              tures provided by modules.  With no  options  apart  from
              -F,  the  module  named  module  is loaded, if it was not
              already loaded, and the list of features is  set  to  the
              required state.  If no features are specified, the module
              is loaded, if it was not already loaded, but the state of
              features is unchanged.  Each feature may be preceded by a
              + to turn the feature on, or - to turn it off; the  +  is
              assumed if neither character is present.  Any feature not
              explicitly mentioned is left in its current state; if the
              module was not previously loaded this means any such fea-
              tures will remain disabled.  The return status is zero if
              all  features  were  set, 1 if the module failed to load,
              and 2 if some features could not be set (for  example,  a
              parameter couldn't be added because there was a different
              parameter of the same name) but the module was loaded.

              The standard features are builtins,  conditions,  parame-
              ters  and math functions; these are indicated by the pre-
              fix `b:', `c:' (`C:' for an infix  condition),  `p:'  and
              `f:',  respectively, followed by the name that the corre-
              sponding feature would have in the shell.   For  example,
              `b:strftime'  indicates  a  builtin  named  strftime  and
              p:EPOCHSECONDS indicates a parameter named  EPOCHSECONDS.
              The module may provide other (`abstract') features of its
              own as indicated by its documentation; these have no pre-
              fix.

              With  -l  or  -L,  features  provided  by  the module are
              listed.  With -l alone, a list of features together  with
              their  states  is  shown,  one feature per line.  With -L
              alone, a zmodload -F command  that  would  cause  enabled
              features  of  the  module to be turned on is shown.  With
              -lL, a zmodload -F command that would cause all the  fea-
              tures  to be set to their current state is shown.  If one
              of these combinations is given the option -P  param  then
              the  parameter  param  is  set  to  an array of features,
              either features together with their state or (if -L alone
              is given) enabled features.

              With the option -L the module name may be omitted; then a
              list of all enabled features for  all  modules  providing
              features  is printed in the form of zmodload -F commands.
              If -l is also given, the state of both enabled  and  dis-
              abled features is output in that form.

              A  set of features may be provided together with -l or -L
              and a module name; in that case only the state  of  those
              features  is considered.  Each feature may be preceded by
              + or - but the character has no effect.   If  no  set  of
              features is provided, all features are considered.

              With  -e,  the  command  first  tests  that the module is
              loaded; if it is not, status 1 is returned.  If the  mod-
              ule  is loaded, the list of features given as an argument
              is examined.  Any feature given with no prefix is  simply
              tested  to  see  if  the  module provides it; any feature
              given with a prefix + or - is tested to see  if  is  pro-
              vided  and  in the given state.  If the tests on all fea-
              tures in the list succeed, status  0  is  returned,  else
              status 1.

              With  -m,  each  entry  in  the given list of features is
              taken as a pattern to be matched against the list of fea-
              tures  provided by the module.  An initial + or - must be
              given explicitly.  This may not be combined with  the  -a
              option as autoloads must be specified explicitly.

              With  -a,  the  given  list  of  features  is  marked for
              autoload from the specified module, which may not yet  be
              loaded.   An  optional  +  may  appear before the feature
              name.  If the feature is prefixed with  -,  any  existing
              autoload  is  removed.  The options -l and -L may be used
              to list autoloads.  Autoloading is specific to individual
              features;  when  the  module is loaded only the requested
              feature is enabled.  Autoload requests are  preserved  if
              the  module  is  subsequently  unloaded until an explicit
              `zmodload -Fa module -feature' is issued.  It is  not  an
              error  to  request  an autoload for a feature of a module
              that is already loaded.

              When the  module  is  loaded  each  autoload  is  checked
              against  the features actually provided by the module; if
              the feature is  not  provided  the  autoload  request  is
              deleted.   A  warning message is output; if the module is
              being loaded to provide a  different  feature,  and  that
              autoload  is successful, there is no effect on the status
              of the current command.  If the module is already  loaded
              at the time when zmodload -Fa is run, an error message is
              printed and status 1 returned.

              zmodload -Fa can be used with  the  -l,  -L,  -e  and  -P
              options   for   listing  and  testing  the  existence  of
              autoloadable features.  In this case -l is ignored if  -L
              is  specified.   zmodload  -FaL with no module name lists
              autoloads for all modules.

              Note that only standard features as described  above  can
              be  autoloaded;  other  features require the module to be
              loaded before enabling.

       zmodload -d [ -L ] [ name ]
       zmodload -d name dep ...
       zmodload -ud name [ dep ... ]
              The -d option can be used to specify module dependencies.
              The  modules named in the second and subsequent arguments
              will be loaded before the module named in the first argu-
              ment.

              With  -d and one argument, all dependencies for that mod-
              ule are listed.  With -d and  no  arguments,  all  module
              dependencies are listed.  This listing is by default in a
              Makefile-like format.  The -L option changes this  format
              to a list of zmodload -d commands.

              If -d and -u are both used, dependencies are removed.  If
              only one argument is given,  all  dependencies  for  that
              module are removed.

       zmodload -ab [ -L ]
       zmodload -ab [ -i ] name [ builtin ... ]
       zmodload -ub [ -i ] builtin ...
              The  -ab  option defines autoloaded builtins.  It defines
              the specified builtins.  When any of  those  builtins  is
              called,  the  module  specified  in the first argument is
              loaded and all its features are  enabled  (for  selective
              control  of  features  use  `zmodload -F -a' as described
              above).  If only  the  name  is  given,  one  builtin  is
              defined, with the same name as the module.  -i suppresses
              the  error  if  the  builtin  is   already   defined   or
              autoloaded,  but  not if another builtin of the same name
              is already defined.

              With -ab and no arguments, all  autoloaded  builtins  are
              listed,  with  the  module  name  (if different) shown in
              parentheses  after  the  builtin  name.   The  -L  option
              changes this format to a list of zmodload -a commands.

              If  -b  is  used  together with the -u option, it removes
              builtins previously defined with -ab.  This is only  pos-
              sible  if  the  builtin is not yet loaded.  -i suppresses
              the error if the builtin is  already  removed  (or  never
              existed).

              Autoload  requests  are  retained if the module is subse-
              quently unloaded until an explicit `zmodload -ub builtin'
              is issued.

       zmodload -ac [ -IL ]
       zmodload -ac [ -iI ] name [ cond ... ]
       zmodload -uc [ -iI ] cond ...
              The  -ac  option  is  used to define autoloaded condition
              codes. The cond strings give the names of the  conditions
              defined  by the module. The optional -I option is used to
              define infix condition names. Without this option  prefix
              condition names are defined.

              If given no condition names, all defined names are listed
              (as a series of zmodload commands if  the  -L  option  is
              given).

              The  -uc option removes definitions for autoloaded condi-
              tions.

       zmodload -ap [ -L ]
       zmodload -ap [ -i ] name [ parameter ... ]
       zmodload -up [ -i ] parameter ...
              The -p option is like the -b and -c  options,  but  makes
              zmodload work on autoloaded parameters instead.

       zmodload -af [ -L ]
       zmodload -af [ -i ] name [ function ... ]
       zmodload -uf [ -i ] function ...
              The  -f  option  is  like the -b, -p, and -c options, but
              makes zmodload work on autoloaded math functions instead.

       zmodload -a [ -L ]
       zmodload -a [ -i ] name [ builtin ... ]
       zmodload -ua [ -i ] builtin ...
              Equivalent to -ab and -ub.

       zmodload -e [ -A ] [ string ... ]
              The -e option without arguments lists all loaded modules;
              if  the  -A  option  is also given, module aliases corre-
              sponding to loaded modules are also shown.  If  arguments
              are  provided,  nothing  is printed; the return status is
              set to zero if all strings given as arguments  are  names
              of loaded modules and to one if at least on string is not
              the name of a loaded module.  This can be  used  to  test
              for  the  availability  of things implemented by modules.
              In this case, any aliases are automatically resolved  and
              the -A flag is not used.

       zmodload -A [ -L ] [ modalias[=module] ... ]
              For each argument, if both modalias and module are given,
              define modalias to be an alias for the module module.  If
              the  module  modalias  is  ever  subsequently  requested,
              either via a call to zmodload or  implicitly,  the  shell
              will  attempt  to  load module instead.  If module is not
              given, show the definition of modalias.  If no  arguments
              are  given,  list all defined module aliases.  When list-
              ing, if the -L flag was also given, list  the  definition
              as a zmodload command to recreate the alias.

              The  existence of aliases for modules is completely inde-
              pendent of whether the name resolved is  actually  loaded
              as  a module: while the alias exists, loading and unload-
              ing the module under  any  alias  has  exactly  the  same
              effect  as  using  the resolved name, and does not affect
              the connection between the alias and  the  resolved  name
              which can be removed either by zmodload -R or by redefin-
              ing the alias.  Chains of aliases (i.e. where  the  first
              resolved  name  is  itself an alias) are valid so long as
              these are not circular.  As the  aliases  take  the  same
              format as module names, they may include path separators:
              in this case, there is no requirement for any part of the
              path  named to exist as the alias will be resolved first.
              For example, `any/old/alias' is always a valid alias.

              Dependencies added to aliased modules are actually  added
              to  the  resolved  module;  these  remain if the alias is
              removed.  It is valid to create an alias  whose  name  is
              one of the standard shell modules and which resolves to a
              different module.  However, if a module has dependencies,
              it  will  not  be  possible  to use the module name as an
              alias as the module will already be marked as a  loadable
              module in its own right.

              Apart from the above, aliases can be used in the zmodload
              command anywhere module  names  are  required.   However,
              aliases will not be shown in lists of loaded modules with
              a bare `zmodload'.

       zmodload -R modalias ...
              For each modalias argument that was previously defined as
              a module alias via zmodload -A, delete the alias.  If any
              was not defined, an error is caused and the remainder  of
              the line is ignored.

       Note  that  zsh  makes  no distinction between modules that were
       linked into the shell and modules that are  loaded  dynamically.
       In both cases this builtin command has to be used to make avail-
       able the builtins and other things defined  by  modules  (unless
       the  module  is  autoloaded  on these definitions). This is true
       even for systems that don't support dynamic loading of modules.
